Skip to main content

cron Resource

This page is generated from the Chef Infra Client source code.
To suggest a change, edit the cron.rb file and submit a pull request to the Chef Infra Client repository.

All Infra resources page


Use the cron resource to manage cron entries for time-based job scheduling. Properties for a schedule will default to * if not provided. The cron resource requires access to a crontab program, typically cron.

Warning

The cron resource should only be used to modify an entry in a crontab file. The cron_d resource directly manages cron.d files. This resource ships in Chef Infra Client 14.4 or later and can also be found in the cron cookbook) for previous Chef Infra Client releases.

Syntax


The full syntax for all of the properties that are available to the cron resource is:

cron 'name' do
  command          String
  day              Integer, String # default value: "*"
  environment      Hash # default value: {}
  home             String
  hour             Integer, String # default value: "*"
  mailto           String
  minute           Integer, String # default value: "*"
  month            Integer, String # default value: "*"
  path             String
  shell            String
  time             Symbol
  time_out         Hash # default value: {}
  user             String # default value: "root"
  weekday          Integer, String, Symbol # default value: "*"
  action           Symbol # defaults to :create if not specified
end

where:

  • cron is the resource.
  • name is the name given to the resource block.
  • action identifies which steps Chef Infra Client will take to bring the node into the desired state.
  • command, day, environment, home, hour, mailto, minute, month, path, shell, time, time_out, user, and weekday are the properties available to this resource.

Actions


The cron resource has the following actions:

:create
Create an entry in a cron table file (crontab). If an entry already exists (but does not match), update that entry to match. (default)
:delete
Delete an entry from a cron table file (crontab).
:nothing
This resource block does not act unless notified by another resource to take action. Once notified, this resource block either runs immediately or is queued up to run at the end of a Chef Infra Client run.

Properties


The cron resource has the following properties:

command
Ruby Type: String | REQUIRED

The command to be run, or the path to a file that contains the command to be run.

day
Ruby Type: Integer, String | Default Value: *

The day of month at which the cron entry should run (1 - 31).

environment
Ruby Type: Hash | Default Value: {}

A Hash containing additional arbitrary environment variables under which the cron job will be run in the form of ({'ENV_VARIABLE' => 'VALUE'}). Note: These variables must exist for a command to be run successfully.

home
Ruby Type: String

Set the HOME environment variable.

hour
Ruby Type: Integer, String | Default Value: *

The hour at which the cron entry is to run (0 - 23).

mailto
Ruby Type: String

Set the MAILTO environment variable.

minute
Ruby Type: Integer, String | Default Value: *

The minute at which the cron entry should run (0 - 59).

month
Ruby Type: Integer, String | Default Value: *

The month in the year on which a cron entry is to run (1 - 12, jan-dec, or *).

path
Ruby Type: String

Set the PATH environment variable.

shell
Ruby Type: String

Set the SHELL environment variable.

time
Ruby Type: Symbol
Allowed Values: :annually, :daily, :hourly, :midnight, :monthly, :reboot, :weekly, :yearly

A time interval.

time_out
Ruby Type: Hash | Default Value: {}

A Hash of timeouts in the form of ({'OPTION' => 'VALUE'}). Accepted valid options are:

  • preserve-status (BOOL, default: ‘false’),
  • foreground (BOOL, default: ‘false’),
  • kill-after (in seconds),
  • signal (a name like ‘HUP’ or a number)

New in Chef Infra Client 15.7

user
Ruby Type: String | Default Value: root

The name of the user that runs the command. If the user property is changed, the original user for the crontab program continues to run until that crontab program is deleted. This property is not applicable on the AIX platform.

weekday
Ruby Type: Integer, String, Symbol | Default Value: *

The day of the week on which this entry is to run (0-7, mon-sun, monday-sunday, or *), where Sunday is both 0 and 7.


Common Resource Functionality


Chef resources include common properties, notifications, and resource guards.

Common Properties

The following properties are common to every resource:

compile_time

Ruby Type: true, false | Default Value: false

Control the phase during which the resource is run on the node. Set to true to run while the resource collection is being built (the compile phase). Set to false to run while Chef Infra Client is configuring the node (the converge phase).

ignore_failure

Ruby Type: true, false, :quiet | Default Value: false

Continue running a recipe if a resource fails for any reason. :quiet will not display the full stack trace and the recipe will continue to run if a resource fails.

retries

Ruby Type: Integer | Default Value: 0

The number of attempts to catch exceptions and retry the resource.

retry_delay

Ruby Type: Integer | Default Value: 2

The delay in seconds between retry attempts.

sensitive

Ruby Type: true, false | Default Value: false

Ensure that sensitive resource data is not logged by Chef Infra Client.

Notifications

notifies

Ruby Type: Symbol, 'Chef::Resource[String]'

A resource may notify another resource to take action when its state changes. Specify a 'resource[name]', the :action that resource should take, and then the :timer for that action. A resource may notify more than one resource; use a notifies statement for each resource to be notified.

If the referenced resource does not exist, an error is raised. In contrast, subscribes will not fail if the source resource is not found.

A timer specifies the point during a Chef Infra Client run at which a notification is run. The following timers are available:

:before

Specifies that the action on a notified resource should be run before processing the resource block in which the notification is located.

:delayed

Default. Specifies that a notification should be queued up, and then executed at the end of a Chef Infra Client run.

:immediate, :immediately

Specifies that a notification should be run immediately, for each resource notified.

The syntax for notifies is:

notifies :action, 'resource[name]', :timer
subscribes

Ruby Type: Symbol, 'Chef::Resource[String]'

A resource may listen to another resource, and then take action if the state of the resource being listened to changes. Specify a 'resource[name]', the :action to be taken, and then the :timer for that action.

Note that subscribes does not apply the specified action to the resource that it listens to - for example:

file '/etc/nginx/ssl/example.crt' do
  mode '0600'
  owner 'root'
end

service 'nginx' do
  subscribes :reload, 'file[/etc/nginx/ssl/example.crt]', :immediately
end

In this case the subscribes property reloads the nginx service whenever its certificate file, located under /etc/nginx/ssl/example.crt, is updated. subscribes does not make any changes to the certificate file itself, it merely listens for a change to the file, and executes the :reload action for its resource (in this example nginx) when a change is detected.

If the other resource does not exist, the subscription will not raise an error. Contrast this with the stricter semantics of notifies, which will raise an error if the other resource does not exist.

A timer specifies the point during a Chef Infra Client run at which a notification is run. The following timers are available:

:before

Specifies that the action on a notified resource should be run before processing the resource block in which the notification is located.

:delayed

Default. Specifies that a notification should be queued up, and then executed at the end of a Chef Infra Client run.

:immediate, :immediately

Specifies that a notification should be run immediately, for each resource notified.

The syntax for subscribes is:

subscribes :action, 'resource[name]', :timer

Guards

A guard property can be used to evaluate the state of a node during the execution phase of a Chef Infra Client run. Based on the results of this evaluation, a guard property is then used to tell Chef Infra Client if it should continue executing a resource. A guard property accepts either a string value or a Ruby block value:

  • A string is executed as a shell command. If the command returns 0, the guard is applied. If the command returns any other value, then the guard property is not applied. String guards in a powershell_script run Windows PowerShell commands and may return true in addition to 0.
  • A block is executed as Ruby code that must return either true or false. If the block returns true, the guard property is applied. If the block returns false, the guard property is not applied.

A guard property is useful for ensuring that a resource is idempotent by allowing that resource to test for the desired state as it is being executed, and then if the desired state is present, for Chef Infra Client to do nothing.

Properties

The following properties can be used to define a guard that is evaluated during the execution phase of a Chef Infra Client run:

not_if

Prevent a resource from executing when the condition returns true.

only_if

Allow a resource to execute only if the condition returns true.

Examples


The following examples demonstrate various approaches for using the cron resource in recipes:

Run a program at a specified interval

cron 'noop' do
  hour '5'
  minute '0'
  command '/bin/true'
end

Run an entry if a folder exists

cron 'ganglia_tomcat_thread_max' do
  command "/usr/bin/gmetric
    -n 'tomcat threads max'
    -t uint32
    -v '/usr/local/bin/tomcat-stat --thread-max'"
  only_if { ::File.exist?('/home/jboss') }
end

Run every Saturday, 8:00 AM

The following example shows a schedule that will run every hour at 8:00 each Saturday morning, and will then send an email to “admin@example.com” after each run.

cron 'name_of_cron_entry' do
  minute '0'
  hour '8'
  weekday '6'
  mailto 'admin@example.com'
  action :create
end

Run once a week

cron 'cookbooks_report' do
  minute '0'
  hour '0'
  weekday '1'
  user 'chefio'
  mailto 'sysadmin@example.com'
  home '/srv/supermarket/shared/system'
  command %W{
    cd /srv/supermarket/current &&
    env RUBYLIB="/srv/supermarket/current/lib"
    RAILS_ASSET_ID=`git rev-parse HEAD` RAILS_ENV="#{rails_env}"
    bundle exec rake cookbooks_report
  }.join(' ')
  action :create
end

Run only in November

The following example shows a schedule that will run at 8:00 PM, every weekday (Monday through Friday), but only in November:

cron 'name_of_cron_entry' do
  minute '0'
  hour '20'
  day '*'
  month '11'
  weekday '1-5'
  action :create
end
Edit this page on GitHub

Thank you for your feedback!

×









Search Results